Auto Reset Total Cost - NTT docomo FOMA SO706i Instruction Manual

Displayed call times and charges may differ from
the actual figures. Consumption tax is not included
in the call charges.
If you have subscribed to the 2in1, the total amount
of Number A/B appears as the Total calls duration
and Total calls cost.
i "SETTINGS" "Call time/Charge"
1
"Call data"
N
If the last or total voice or digital calls duration exceeds
"199h59m59s", the call count returns to "0s".
The time and charge of i-mode or packet
communication, and the charge of sending Chaku-
moji are not counted. To check i-mode communication
charges, see the "Mobile Phone User's Guide [i-mode]
FOMA version".
The time taken to pick up a call, or for the other party
to pick up a call, and the time for switching a voice call
and a videophone call are not counted.
When the FOMA terminal is turned off, the duration
and charge for the last call reverts to "0s" and "￥
respectively.
Turning the FOMA terminal off does not affect the total
duration and charge.
The international call charge for WORLD CALL is
counted. For other international call services, the
charge is not counted.
Resetting the total call time and total
call charges
You can reset the Total calls duration or Total calls
charge displayed in the "Call data" to zero.
i "SETTINGS" "Call time/Charge"
1
"Reset total" Enter your security
code Select any item:
Reset total duration......Resets the accumulated
duration.
Reset total cost......Enters PIN2 code and resets
the accumulated charge.
PIN2 code → p.100
294
Resetting charges automatically
You can set the FOMA terminal to reset the Total calls
cost displayed in "Call data" to zero automatically on
the 1st day every month, at 0:00.
i "SETTINGS" "Call time/Charge"
1
"Auto reset total cost" Enter your
security code
"Auto reset" "ON" Enter PIN2 code
2
PIN2 code → p.100
■ Not to set Auto reset
"OFF"
N
Setting Auto reset total cost to "ON" and changing the
month in "Set main time" resets the Total calls cost.
The Auto reset total cost is reset to "OFF" when:
• The FOMA terminal is turned on without the FOMA
card (UIM) inserted
∗∗
" • t is pressed on the PIN2 code input screen
which appears when the FOMA terminal is turned
on
• The PIN2 code is locked →p.100
• An error occurs on the FOMA card (UIM)
Setting the Upper Limit of
Charge to Notify the Alarm
<Reset total>
When accumulated charge displayed at "Call data"
exceeds the cost limit set in this function, you are
notified on the standby screen or with alarms.
The alarm notification works only once when the
accumulated charge exceeds the set cost limit.
Exceeding the limit does not prevent you from
making a call.
i "SETTINGS" "Call time/Charge"
1
"Notice designate calls" Enter your
security code
2 Select any item:
Cost limit
10 and 100,000 by 10 units.
Notify setting
<Auto reset total cost>
<Notice designate calls>
setting......Sets the cost limit between
Notify cost limit......Specifies whether to
notify the cost limit.
Alarm tone......Selects an alarm tone.
Volume......Sets the alarm tone volume
with c.