NTT docomo FOMA SO706i Instruction Manual page 428

Setting the USB mode setting to "Communication mode"
d Set the mode before connecting to PC.
i "Settings" "External connection" "USB mode setting"
1
"Communication mode"
Connecting the devices
The following procedure explains how to connect the FOMA USB Cable with Charge Function
01/02 (optional).
Open the external connector cap of the FOMA terminal
1
Check the orientation of the external connector of the FOMA terminal, then
2
insert the external connector of the FOMA USB Cable with Charge Function
01/02 horizontally until you hear a click
Connect the USB connector of the FOMA USB Cable with Charge Function
3
01/02 to the USB terminal of your PC
" " appears on the FOMA terminal when the FOMA USB Cable with Charge Function 01/02 is
connected.
NOTE
d " " appears on the FOMA terminal display when the FOMA communication setting file is installed and the connection with
a PC is recognized.
FOMA USB Cable with
Charge Function 01/02
7