Using The Prefix Function - NTT docomo FOMA SO706i Instruction Manual

r (voice call)/o (V.phone)
3
N
This function is available only when the other party's
phone can display caller ID.
If you hear a message requesting your caller ID, show
your caller ID.
When making an international call, "186"/"184" may be
disabled. Select "Notify Caller ID" from the function
menu.
If you make a call with the "186"/"184" prefix, the
phone number including this prefix is recorded in the
Redial/Dialed calls.
Sending Push Signals
By sending push signals from the FOMA terminal,
you can use services such as ticket ordering and
bank balance requests.
Storing dialing data as pause dial
record entries
You can store the dialing data used as push signals to
Pause dial beforehand. Inserting P (pause) into the
dialing data allows you to send data with a separation
where a pause lies.
You can store 1 dialing data, consisting of up to 128
characters.
You can enter numbers from 0 to 9, the # and *
symbols, and P (pause) for dialing data.
You cannot enter P (pause) in succession or at the
beginning of the dialing data.
i "SETTINGS" "Dialing" "Pause
1
dial"
The "Pause dial" screen
appears.
■ If there is dialing data
already stored
The stored dialing data
appears.
o (Edit) Enter the dialing data
2
Press 0 to 9, q and w to enter the
dialing data.
■ To enter P (pause)
w (1 second or longer)
Edit......Edits the dialing data.
Send pause
other party and sends the dialing data.
Each time you press r, the dialing data up to P (pause)
is transmitted.
Delete......Deletes the stored dialing data.
Transmitting the dialing data as a
pause dial
1
<Pause dial>
2
3
N
Some phones may be unable to receive push signals.

Using the Prefix Function

You can store the prefix numbers such as IDD prefix
code and 186/184 for notifying/withholding your caller
ID beforehand and add these prefix numbers when
you make calls.
Pause dial
Function menu p.57
Storing the prefix numbers
You can store up to 7 prefix numbers.
You can enter numbers from 0 to 9 and the #, *
and + symbols.
Pause dial screen (p.57)
dial......Enters the phone number of the
i "SETTINGS" "Dialing" "Pause
dial" d (Send)
Dial the phone number of the
destination r
The FOMA terminal calls the entered phone
number and displays the dialing data up to the
first P (pause) while the dialed phone is ringing.
P (pause) is not displayed.
r
Each time you press r, the dialing data up to
P (pause) is transmitted. Once the FOMA
terminal has finished sending the last number,
the in-call screen reappears.
■ To transmit all the dialing data at once
j (1 second or longer) "Send at one time"
It may not be possible to send all the data at
once to some recipients.
Continued on next page
<Prefix setting>
57