Sound Effects; Changing The Ringback Tone - NTT docomo FOMA SO706i Instruction Manual

Setting 3D Sound
Enjoy rich sounds of melodies, voice/videophone call
and mail ring tones, sound effects and i-motion when
an earphone/microphone (optional) is connected.
i "SETTINGS" "Incoming call"
1
"Sound effect" "Stereo&3D sound"
"ON" or "OFF"
● Sound effects
Create 3-dimensional and resonating sounds using
an earphone/microphone. Sound effects allow you to
enjoy i-αppli games and melody playback with richer
and more realistic sound.
Playing i-motion with sound effects adds effects such
as "natural third dimension", "rich low sound" and
"clear instrumental or voice sound" to sounds heard
through earphone.
An icon appears for i-motion with sound effects on
the movie list screen. → p.226
N
Individuals feel differently about 3 dimension. If sound
bothers you, set this function to "OFF".
Setting this function to "ON" does not add effects to
sounds heard through the built-in speaker.
This function is not available if "Headset usage
setting" is set to "Headset+speaker". To enable the
function, set the setting to "Headset only".
Setting the Vibration to Notify
You of Incoming Calls
You can set different vibration patterns to notify you
when you receive a voice call, videophone call or
mail.
i "SETTINGS" "Incoming call"
1
"Vibrator" Select an item to set the
vibration:
Select "Phone" to set the vibration for voice calls
and 64K data communication.
Select "Mail" to set the vibration for i-mode mail,
Area Mail, SMS and packet communication.
Select the vibration pattern:
2
Pattern 1-Pattern 3......Vibrates in each pattern.
When you switch the highlighted item while selecting
an item, the FOMA terminal vibrates in the
highlighted pattern.
84
<Sound effect>
■Icons on the standby screen while setting the
vibration pattern
N
<Vibrator priority>

Changing the Ringback Tone

<Vibrator>
You can set whether to change the tone heard by the
other party or not (YES/NO) when you receive a voice
call.
1
N
Melody linkage......The FOMA terminal vibrates in
a pattern matched to the melody set as the ring tone.
OFF......The FOMA terminal does not vibrate.
: The vibration starts when receiving either voice
or videophone calls.
: The vibration starts when receiving either mail/
MessageR/F.
: Both " " and " " are set.
When the vibration is set, take care that the vibration
does not move the FOMA terminal towards fire (e.g.
on a space heater) or cause it to fall off a table, etc.
Even when "Melody linkage" is selected, the FOMA
terminal not always vibrates to the melody. When no
vibration pattern is set for the melody or when an
i-motion or Chaku-Uta-Full
FOMA terminal vibrates in Pattern 2.
When receiving Area Mail, vibration is linked with the
beep sound (when the buzzer sounds) or follows the
settings in "Mail" under "Vibrator" (when an incoming
Area Mail sounds).
When the vibrator settings are duplicated, the priority
is assigned as follows:
① Vibrator for "Ring tone/Image (for individual)"
② Vibrator for "Ring tone/Image (for group)"
③ Vibrator setting
i "SETTINGS" "Incoming call"
"Melody Call setting" "YES" or "NO"
When you select "YES", accesses the Melody
Call i-mode site. Packet communications
charges apply when accessing an IP site,
i-mode menu site or free music corner except
the setup site.
Follow the instructions on the screen to set.
Melody Call is not activated when the other party dial
up from a videophone call.
®
is set as the ring tone, the
<Melody Call setting>