NTT docomo FOMA SO706i Instruction Manual page 262

Transferring all data at a time using
the iC communication
<iC trans. all/Touch to receive all>
You can exchange all data at a time with other
devices using the iC communication function.
● Sending all data at a time
Select "iC trans. all" from the function menu of list
screen or detail screen of the data you want to send all.
<Example: To send all the phonebook data>
Phonebook list screen (p.73)
1
u (FUNC) "iC trans. all"
Enter your security code Enter
2
session number
"Session number" → p.257
3 Put the FeliCa mark "
FeliCa mark "e" of the other party
"YES"
Transmission of all data starts.
When the data is sent, a notification message
appears indicating that the communication is
completed.
■ To cancel sending all data
"NO"
■ To exit during sending
o (Quit)
● Receiving all data at a time
Put the FeliCa mark "
1
e
FeliCa mark "
Perform the data sending operation of
2
all data from the FOMA terminal of the
other party
3 Enter your security code Enter
session number
"Session number" → p.257
4 Select "YES" when the overwrite
confirmation screen appears
The data reception starts and the progress bar
appears.
When the received data is saved, a notification
message appears indicating that the
communication is completed.
■ To quit receiving data
"NO"
■ To exit during the receiving
o (Quit)
260
e
" close to the
e
" close to the
" of the other party
Forwarding Data by Cable
Connection
By connecting the FOMA terminal and your PC with
the FOMA USB Cable with Charge Function 01/02
(optional), you can exchange various data such as
phonebook entries or images.
When you exchange data using the FOMA USB
Cable with Charge Function 01/02 (OBEX™
connection), you have to install " ドコモケータイ
datalink" (DOCOMO keitai datalink) (p.329) and
"FOMA通信設定ファイル" (FOMA Communication
Setting File) in the provided CD-ROM.
For details such as installing of the " ドコモケータ
イ datalink" (DOCOMO keitai datalink), refer to the
download page of the software. For details on data
exchange, refer to the help files of the software.
For details on installing "FOMA 通信設定ファイル "
(FOMA Communication Setting File) and the
operational environment, refer to "PC Connection"
chapter and "Manual for PC Connection" (PDF
format) in the provided CD-ROM.
Set "USB mode setting" to "Communication mode"
before transferring data.
■ Important
Ensure that the FOMA terminal and PC are properly
connected. An improper connection could not only
prevent data exchange but also result in the loss of data.
Attempting to exchange data when the FOMA
terminal's battery level is low or empty could not only
prevent data exchange but also result in the loss of
data. Make sure that the FOMA terminal's battery is
charged enough. Also, check the power of PC.
All the data on the FOMA terminal may be erased if
an error occurs while forwarding all from PC to the
FOMA terminal. Before forwarding all, check the
cable connection, the battery level of the FOMA
terminal and the power of PC.
Barring Phonebook Image
Forwarding
When you use the Infrared data exchange, iC
communication, copying to microSD card function or
data exchange (OBEX™ connection) to transfer
phonebook data, you can prevent transferring still
images stored in the phonebook.
i "LIFEKIT" "Forwarding image"
1
"OFF"
■ To forward
"ON"
<OBEX™ connection>
<Forwarding image>