Auto Answer Setting - NTT docomo FOMA SO706i Instruction Manual

Using the switch to make calls
1 Press the switch for 1 second or longer
on the standby screen
The FOMA terminal makes a call to a phone
number set at "Headset sw to dial".
■ To dial by entering a phone number
Enter a phone number Press the switch for 1
second or longer
You can also make a phone call from the
phonebook, Redial/Dialed calls/Received calls.
When you finish talking, hold down the
2
switch for 1 second or longer
The FOMA terminal emits a short double-beep
and ends the call.
Using the switch to accept calls
While ringing Press the switch
1
The FOMA terminal emits a short beep and
answers the call.
2 When you finish talking, hold down the
switch for 1 second or longer
The FOMA terminal emits a short double-beep
and ends the call.
N
If you have subscribed to the "Call Waiting", you can
answer a call that comes in during another call by
pressing the switch on the flat-plug earphone/
microphone with switch. You can also switch calls by
pressing the switch for 1 second or longer. However,
pressing the switch does not end the current call.
Do not repeatedly press and release the switch on the
flat-plug earphone/microphone. The FOMA terminal
may answer the call automatically.
Automatically receiving calls with an
earphone/microphone connected
When a flat-plug earphone/microphone with switch
(optional) is connected, this function allows you to
answer received calls automatically without pressing
the switch.
You cannot answer the call automatically during a
voice or videophone call.
i "SETTINGS" "External
1
connection" "Auto answer setting"
"Phone" or "Videophone" "ON"
Enter the ring time (001 to 120 in 3
digits)
■ To disable the setting
"OFF"
N
When answering a videophone call automatically, your
substitute image is displayed to the caller.
Connecting an earphone/microphone with switch
while the FOMA terminal is ringing does not answer a
call automatically, but removing it while the terminal is
ringing answers a call automatically.
Resetting the Function
Settings
You can reset the FOMA terminal's function settings
to the defaults set at the time of purchase.
Do not mistake "Initialize" for "Reset settings".
If you perform "Initialize", you will lose all the data
you have stored. → p.300
For details on the functions that are reset, refer to
"Menu Function List" (p.340).
When the FOMA terminal is connected to an
external device such as a PC, the setting of "USB
mode setting" is not reset to the default setting.
To reset the functions below to default, run Reset
settings in each function:
• i-mode settings (reset) → p.148
• Reset mail settings → p.178
• Reset Full Browser settings → p.221
i "SETTINGS" "Other settings"
1
"Reset settings" Enter your security
code "YES"
N
"3G/GSM setting" may not be reset to default
depending on the network condition.
<Auto answer setting>
<Reset settings>
299