NTT docomo FOMA SO706i Instruction Manual page 113

Using the IC Card
Authentication
You can release Dial lock or Keypad lock or you can
perform the user authentication without entering your
security code on the screen which requires your
security code entry only by placing the FOMA
terminal on a FeliCa-compatible contactless IC card
(external IC card).
You can use the IC card authentication even when
IC card lock is set.
You can store up to 2 contactless IC cards.
Activating the IC card authentication
You can store the contactless IC card to enable the
user authentication.
i "SETTINGS" "Lock/Security"
1
"IC card authentic." Enter your
security code
The "IC card authentic."
screen appears.
2 "ON" "OK"
■ To activate the stored
contactless IC card
"ON"
■ To deactivate the IC
card authentication
"OFF" "YES" or "NO"
Select "YES" when you
delete all the contactless IC card data, and
select "NO" when you do not delete them.
3 Place the contactless IC card on the
FeliCa mark "e" on the FOMA
terminal
" " disappears when the card is stored.
IC card authentic. screen
(p.111)
New ext. IC card......Stores up to 2 contactless IC cards.
If 2 cards are already stored, delete the old data to store
the card.
Del. ext. IC card......Deletes the contactless IC card
data.
<IC card authentic.>
IC card authentic.
Function menu p.111
Using the IC Card Authentication
<Example: To release the Dial lock/Keypad lock>
1 Open the FOMA terminal when Dial
lock/Keypad lock is set
" " appears on the screen and the user
authentication is enabled for about 10 seconds.
Pressing p (iC auth.) on the standby screen
also enables the user authentication.
■ To release the lock with the FOMA
terminal folded
Pressing a ( ▲マナー ) (1 second or longer)
enables the user authentication for about 10
seconds.
Place the contactless IC card on the
2
FeliCa mark "e" on the FOMA terminal
The lock is released when the user
authentication is performed successfully.
Contactless IC card
Hold the contactless IC card and the FOMA
terminal in your hand, and put "e" of the
back cover close to the IC card.
* Put the IC card close to the FOMA terminal as illustrated
The FOMA terminal may have difficulty in authentication
depending on the IC card. In this case move the card
horizontal or vertical.
■ When entering your security code
" " appears when the security code entry
screen appears and the user authentication is
enabled for about 10 seconds. If you place the
contactless IC card stored with this function on
the FeliCa mark on the FOMA terminal, the user
authentication is performed.
N
Even though the contactless card is compatible with
FeliCa, this function may not be available depending
on the card.
When using the IC card authentication, hold the
contactless IC card and the FOMA terminal with your
hands.
If you fail 5 times in sequence, the IC card
authentication is deactivated and the authentication
can be performed only with the security code. After
the authentication with your security code is
performed successfully, you can use the IC card
authentication again.
111