Holding Down Ch-Key - NTT docomo FOMA SO706i Instruction Manual

Assigning a Function to the
FUNC Key
Change functions to call by pressing and holding p
while the standby screen or task change screen is
displayed.
Camera, Schedule, Music Player, Music&Video
Channel and 1Seg can be assigned.
i "SETTINGS" "Other settings"
1

"Holding down ch-key"

■ To reset to default
u (FUNC) "Reset ch-key"
Select a function to assign "YES"
2
Sorting the Main Menu
You can sort the menu that can be customized by
yourself. You can also place the sub item.
<To sort the first hierarchy menu>
While the menu you can sort is
1
displayed Highlight the place to be
newly allocated u (FUNC) "Manual-
sort" Select the menu
2 "Replace" "OK"
■ Selecting the sub item
"Select sub item" Select the menu
"Replace" "OK"
The menus are changed.
Using the Alarm Function
You can store up to 10 alarms.
i "LIFEKIT" "Alarm"
1
The "Alarm list" screen
appears.
■ To switch ON/OFF with
the last settings
Highlight the setting item
p (ON/OFF)
"ON/OFF" switches each
time you press p.
284
<Holding down ch-key>
<Alarm>
Alarm list
Function menu p.285
■ To check the previous
settings
Select the setting item
The "Alarm detail" screen
appears.
Highlight the item to set o (Edit)
2
Select any item:
3
Edit title......Enters the title of the alarm. You
can enter up to 6 double-byte or 12 single-byte
characters.
Time setting......Enters the time at which the
alarm will sound.
Repeat......Selects the alarm repetitions from
"1 time/Daily ( )/Select day (
Alarm tone......Selects the alarm tone from
clock alarm tone or folders of melody, i-motion,
music, etc.
Volume......Sets the alarm tone volume with c.
Snooze setting......Specifies whether a snooze
(repeating) alarm is set or not.
ON......Enter the number of times for ringing (01
to 10 times) and the ringing interval (01 to 10
minutes).
The alarm tone (about 1 minute) rings repeatedly
for the set number of times in the set interval.
OFF......Enter the ringing time (01 to 10 minutes).
Sounds the alarm tone continuously for the
specified time.
Auto power ON......Specifies whether the
FOMA terminal is automatically turned on or not
when the time for an alarm is reached.
Set the respective items o (Finish)
4
N
When the FOMA terminal is automatically turned on to
notify you of an alarm, if you set a melody, i-motion or
music downloaded from sites as alarm tone, the
"Clock Alarm Tone" is played.
Before entering an area such as an aircraft or hospital
where there is electronic equipment that uses
extremely precise control systems or very low signal
levels and the use of mobile phones is prohibited, set
the "Auto power ON" setting to "OFF" and then turn
the FOMA terminal off.
Alarm detail
)".