Communication Setup; Checking The Procedure - NTT docomo FOMA SO706i Instruction Manual

Required devices
The following hardware and software, in addition to
the FOMA terminal and a PC, are required.
• FOMA USB Cable with Charge Function 01/02
(optional) or FOMA USB Cable (optional)
• Bundled CD-ROM "CD-ROM for FOMA SO706i"
N
Purchase the specified "FOMA USB Cable with
Charge Function 01/02" or "FOMA USB Cable". The
USB cable for PC cannot be used because the shape
of the connector is different.
USB HUB may not function correctly.

Checking the Procedure

In data communication, the connection is made
through a dial-up connection with Internet service
providers or LANs that support FOMA data
communication.
■ About the software provided in the provided "CD-
ROM for FOMA SO706i"
The CD-ROM contains the SO706i Communication
setting file (drivers), FOMA PC setting software and
FirstPass PC software.
The FOMA Communication setting file is software
(driver) required for connecting the FOMA terminal
with a PC via the FOMA USB Cable with Charge
Function 01/02 (optional) to carry out packet
communication, 64K data communication or data
transfer (OBEX™ connection). Installing the FOMA
Communication setting file embeds each driver into
Windows.
Using the FOMA PC setting software, you can
easily set up packet communication and 64K data
communication and create a dial-up connection.
328
Flow chart for completing the data

communication setup

■Data exchange (OBEX™ connection)
When you use the FOMA USB Cable with Charge
Function 01/02 (optional), you have to install "FOMA
通信設定ファイル " (FOMA Communication setting
file).
Download and Install the FOMA
Communication setting file *
Install FOMA Communication setting file in the
provided CD-ROM or download and install it from the
DOCOMO website
Data exchange
* : Install DOCOMO keitai datalink (p.329) in addition.
■Packet communication/64K data
communication
Download and Install the FOMA
Communication setting file
Install FOMA Communication setting file in the
provided CD-ROM or download and install it from the
DOCOMO website
To set up the
access point
using the FOMA
PC Setting
Software
Install the FOMA PC
Setting Software
Set up
The set up procedures for packet communication,
64K data communication and set up without the
FOMA PC Setting Software are different.
Connect/Disconnect
* : To use Internet with the FOMA terminal and PC
connected, "mopera U" (separate subscription is required)
is useful, which supports broadband connection, etc.
Consider the plan in which you are charged only in a
month when you use the service. If you use "mopera" for
which you do not need a subscription, you can access
Internet immediately.
For more information, visit the DOCOMO website.
To set up the
access point
without
using the
FOMA PC
Setting
Software
*