NTT docomo FOMA SO706i Instruction Manual page 317

Using the Call Forwarding service
i "SERVICE" "Call Forwarding"
1
Select any item:
*1
Activate ......Set the forwarding number and the
ring time, then select "Activate".
Register fwd number......Enter the forwarding
number.
Once you set the number, a star "★ " appears
next to "Register fwd number".
• You can use f or g to enter the number by
searching the phonebook.
How to search the phonebook →p.73
Set ring time......Enter the ring time (000 to
120 seconds).
Once you set the number, a star "★ " appears
next to "Set ringing time". When set to 0
second, received calls are not recorded in the
"Received calls" record.
Activate......Activates the Call forwarding
service.
*1
......Deactivates the Call forwarding
Deactivate
service.
Change forwarding No......Enter a phone number
to set a new forwarding number.
When you select "Change No.+Activate", you can
also set the Call Forwarding Service to "Activate" at
the same time.
*2
......When the forwarding
Fwd number busy
number is busy, received calls are transferred to the
Voice mail service center.
*1
......Checks the current Call
Check setting
forwarding service settings.
*1: When 2in1 is set to Dual mode, the screen appears
to select Number A or Number B. However, the
selection screen appears for "Check setting" even in
B mode.
*2: The subscription to the "Voice Mail service" is
required.
N
<Activate>
When 2in1 is set to B mode, you cannot select
"Register fwd number" and "Set ring time".
<Change forwarding number>
When 2in1 is set to B mode, you cannot select
"Change No. + Activate".
<Check setting>
When checking Number B setting for 2in1, only
"Active" or "Inactive" appears.
Setting or canceling the call
forwarding guidance message
On the standby screen 142
1
9 r
• Set the call forwarding guidance message by
following the audio guidance message.
• For more information, refer to the "Mobile
Phone User's Guide [Network Services]".
Nuisance Call Blocking
Service
This service enables you to reject receiving
"Nuisance calls". Once you store the number to
reject, calls from the number are automatically
rejected and answered by a message.
The ring tone does not sound even when you
receive a call from the number stored to reject.
Also, the call is not recorded in "Received calls"
record.
Using the Nuisance Call Blocking
service
i "SERVICE" "Nuisance Call Blk"
1
Select any item:
Register Caller......Registers the number of the last
caller you answered as a barred numbers.
Register number......Registers the phone number
by using the dial keys or quoting from the phonebook
or Received calls record, etc.
• You can use f or g to enter the number by
searching the phonebook. Searching the
phonebook→p.73
• You can use h to search the Received calls
record and j to search the Redial record.
Delete last entry......Deletes the last registered
phone number. By repeating the same procedure,
you can delete the stored barred number one by one
from the last one.
Delete all entries......Deletes all the barred
numbers.
The number of entries......Checks the number of
call barring entries.
<Nuisance Call Blk>
315