NTT docomo FOMA SO706i Instruction Manual page 454

<Example: For Windows XP>
Connect the FOMA USB Cable with Charge Function 01/02 (optional) to the
1
FOMA terminal
Turn on the FOMA terminal, then connect the FOMA USB Cable with Charge
2
Function 01/02 connected to the FOMA terminal to the PC
Click "スタート" (Start) → "すべてのプログラム" (All programs) → "アクセ
3
サリ" (Accessories) → " 通信" (Communication) → " ハイパーターミナル"
(Hyper terminal) to start Hyper terminal
For Windows 2000
Open " スタート " (Start) → " プログラム " (Programs) → " アクセサリ " (Accessories) → " 通信 "
(Communication) → " ハイパーターミナル " (Hyper terminal).
Select the "今後、 このメッセージを表示しない" (Do not display this message
4
again) checkbox and then click "はい" (Yes)
Enter any name in the "名前" (Name)
5
column and click "OK"
"sample" is entered here as an example.
Select "FOMA SO706i" from " 接続
6
方法" (Connection method), and
click "OK"
Click "キャンセル " (Cancel) after the connection
screen appears.
If a COM port of "FOMA SO706i" can be
selected
When Properties of the COM port is displayed,
click "OK".
In this example, "COM3" is selected. See
"Checking the COM port" (p.29) to confirm
the actual COM port number of "FOMA
SO706i" to be selected in " 接続方法"
(Connection method).
33