NTT docomo FOMA SO706i Instruction Manual page 446

Click "ダイヤル" (Dial) and execute
2
access operation
You can leave user name and password blank for
the mopera U or mopera connection. If you
select an Internet service provider other than
mopera U, mopera or you use dial-up
connection, enter the " ユーザー名 " (User name)
and "パスワード " (Password) and click
" ダイヤル " (Dial).
<The Connecting screen appears>
While this screen appears, the log-on process
such as confirmation of the user name and
password is performed.
<Completion of the connection>
When the connection is complete, a message
appears from the indicator of the taskbar
located on the bottom-right of the desktop for
a few seconds.
You can start browser software to view sites
and websites or to use e-mail.
If this message does not appear, check
"Setting up Dial-up Network" (p.29) and
"Setting up Dial-up" (p.36).
d During packet communication, a different icon appears on the FOMA terminal depending on the
communication conditions.
d " " appears on the FOMA terminal during 64K data communication.
NOTE
d When executing data communication by using the FOMA USB Cable with Charge Function 01/02 (optional), dialing
from the dial-up icon is only valid for the FOMA terminal used when the icon is created.
Therefore, to connect to another FOMA terminal, the communication setting file (drivers) must be installed again.
(Communicating, sending data)
(Communicating, receiving data)
(Communicating, no data transfer)
(Sending, or disconnecting)
(Receiving, or disconnecting)
25