NTT docomo FOMA SO706i Instruction Manual page 63

OFF......You can answer the call only with r or
d (Answer/Subst.).
N
Even when "Quick silent" is set, the "Any key answer"
function is used in Manner mode.
Ending/Holding Calls with the
FOMA Terminal Folded
You can set how your FOMA terminal operates when
it is folded during a voice or videophone call.
i "SETTINGS" "Talk" "Setting
1
when folded" Select any item:
No tone......Mutes the sound. The other party does
not hear the hold tone.
Tone on......Puts a call on hold (holding). When the
FOMA terminal is folded, the other party hears the
hold tone. For videophone calls, the image for
holding is sent to the other party.
Speaker ON......The hold tone is sent to the
other party and also plays through the speaker.
Speaker OFF......Only the other party hears
the hold tone.
End the call......Ends the call. It is the same
operation as pressing y.
N
When Manner mode is set, no sound is played
through the speaker even if "Speaker ON" is set.
When a flat-plug earphone/microphone with switch
(optional) is connected, this function is disabled.
Even if the "Tone on" setting is selected, folding the
FOMA terminal activates the "No tone" setting if "Call
Waiting" is switched on.
Adjusting the Earpiece
Volume
On the standby screen c (1 second
1
or longer) Adjust the volume with c
<Setting when folded>
<Volume>
Pressing c (1 second or
longer) displays the earpiece
volume screen. If no
operation is conducted for 2
seconds or longer when the
earpiece volume screen is
displayed, the earpiece
volume screen is expired.
You can adjust the volume in 6 steps from "Level
1" (quietest) to "Level 6" (loudest).
■ To adjust the earpiece volume during a
call
During a voice call: c (1 second or longer)
During a videophone call: c
• You can also adjust with a ( ▲マナー )/s ( ▼メ
モ ).
N
If you adjust the volume during a call, the adjusted
setting is retained after you end the call.
Adjusting the Ring Volume
You can adjust the volume of the ring tone for a
incoming call, mail, MessageR/F in 6 steps for each
type of call. You can also set to silent or to gradually
get louder.
i "SETTINGS" "Incoming call"
1
"Ring volume" Select an item to
adjust its volume
Select "Phone" to adjust the ring tone volume for
voice calls and 64K data communication.
Select "Mail" to adjust the ring tone volume for
i-mode mail, Area Mail, SMS or packet
communication.
Use c to adjust the ring volume
2
d (Set)
■ To raise the volume gradually
Press f in "Level 6"
When set to "Step", the ring volume becomes
louder and louder in every 3 seconds.
■ To set to silent
Press g in "Level 1"
An icon appears in the standby screen to
confirm that a "Silent" ring tone is set.
: "Phone" or "Videophone" is set to "Silent"
: "Silent" is set for "Mail", "MessageR" and/or
"MessageF".
: Both " " and "
N
The ring volume setting specified for "Phone" in this
function is also applied to the "Select ring tone" setting
for a voice call, the alarm tones for "Schedule" and "To
Do list".
<Ring volume>
" are set.
61