I-Mode Malfunction Check Site; Updating Software; Software Update - NTT docomo FOMA SO706i Instruction Manual

i-mode Malfunction Check Site

You can check if sending/receiving mails, downloading images/melodies or other operations are
normally performed on the FOMA terminal by yourself.
Top
Connecting to "i-mode Malfunction Check Site" (Japanese)
• p "iMenu" " お知らせ " " サービス・機能 " "ｉ モード " "ｉ モード故障診断 "
Packet communication charge is not charged for the i-mode malfunction check site.
* Charges apply when accessing from overseas.
Test items vary depending on the FOMA terminal models. Also, the test items are subject to change.
To check the operation with each test item, read the notes on the site carefully before performing test.
When connecting to the i-mode malfunction check site or testing the mail sending, information specific to
your FOMA terminal (model, mail address, etc.) is automatically sent to the server (i-mode malfunction
check server). The information sent to DOCOMO is not used for any other purpose than i-mode malfunction
checking.
When there seems to be a malfunction as a result of the checking, contact the inquiries number provided on
the back of this manual.

Updating Software

Check whether it is necessary to update software on the FOMA terminal. Download and update the
software via packet communication if necessary.
You will be notified of the update in the DOCOMO website or in " お知らせ " (News) of iMenu.
A charge will not be made for the packet communication to update the software.
There are 3 ways to update: "Auto-update", "Now update" and "Reserved update".
Auto-update: The new software is downloaded automatically and overwritten at the preset time.
Now update: Updates immediately.
Reserved update: Updates automatically on the date and time you specified.
You can update the software if the i-mode host is set as the user defined host.
Updating the software (downloading and installing) may take some time.
When you update the software, an SSL connection is established with the server (the software update
server managed by NTT DOCOMO). Validate the certificate beforehand (default: Valid. Setting procedure
→ p.149).
Before updating the software, charge the battery to the full.
Test menu
QR code for connecting to the site
<Software Update>
Continued on next page
377