Functions - NTT docomo FOMA SO706i Instruction Manual

Security Codes Used on the
FOMA Terminal
To make the FOMA terminal more convenient and
secure, some functions require the security code. In
addition to the security code for various FOMA terminal
operations, you also have the Network security code for
accessing network services and the i-mode password.
Make use of the FOMA terminal using an appropriate
security code according to the purpose.
Notes on the security codes
Avoid using a readily predictable number such as
"birthday", "part of the phone number", "street
address number or room number", "1111" and
"1234". Make sure to make a note of the security
code you set in case you forget it.
Take great care not to disclose your security
code to others. If your security code is disclosed
to others and abused, NTT DOCOMO shall have
no liability for any damage due to any
unauthorized use of it.
DOCOMO by no means inquire your security code.
If you forget any of your security codes, you must
bring your official identification providing that you
are the subscriber (such as a driver's license),
the FOMA terminal, and the FOMA card (UIM)
with you to a DOCOMO shop.
For details, contact the inquiries number
provided on the back of this manual.
■Security Code
The security code is set to "0000" (4 zeros) at the
time of purchase. You can change the security code
by yourself. → p.101
When the security code screen
appears, enter the 4 to 8 digit
security code and press d (Set).
The entered security code is
displayed as "_" and the
numbers are not displayed.
When you enter a wrong security code or enter
nothing for about 15 seconds, a warning tone
sounds and a warning message appears.
■Network Security Code
The network security code is a 4-digit number required for
using the DOCOMO e-site or various network services.
You can set any number at the time of subscription but
you can change it afterwards by yourself.
If you have the "docomo ID/Password" for general PC
support site "My docomo", you can change the
network security code from your PC.
100
You can also change it by yourself using i-mode, from
" 各種手続き " (Applications and Procedures) on the
DOCOMO e-site. (Japanese)
* For details of "My docomo" and "DOCOMO e-site",
see the back of the back cover of this manual.
■i-mode Password
You will need a 4-digit "i-mode password" to register or
unregister site in My Menu, subscribe to or cancel
Message Service and fee-based i-mode sites, and
enter Mail Settings (There may be other passwords set
independently by the information service providers).
The default i-mode password when you apply for
i-mode service is set to 0000. Please set a new
password.
You can change the password using i-mode, by
selecting o "i Menu" "English" "Options"
"Change i-mode Password".
■PIN1 Code and PIN2 Code
You can set 2 PIN codes on the FOMA card (UIM) for
your FOMA terminal, the PIN1 code and PIN2 code.
These security codes are set to "0000" (4 zeros) at
the time of subscription. You can change the PIN1/
PIN2 codes by yourself.→ p.101
PIN1 is a four- to eight-digit number (code) and must be
entered every time you insert the FOMA card (UIM) into
the FOMA terminal or turn on the handset power. The
PIN1 code is used to verify the handset user and
prevent others from gaining unauthorized access to your
mobile phone handset. When the PIN1 code setting is
set to "ON", you can make and receive calls and use
handset functions after entering the correct PIN code.
PIN2 code is a 4- to 8-digit password that you enter
when using or requesting user certificates or
performing tasks such as resetting total call charges.
* When you purchase a new FOMA terminal and
insert your current FOMA card (UIM), use the PIN1
and PIN2 codes you set to the current card.
When the PIN1 or PIN2 code entry
screen appears, enter the 4 to 8
digit PIN1/PIN2 code and press
d (Set).
The entered PIN1/PIN2 code is
displayed as "_".
If you enter a wrong PIN1/PIN2
code three times consecutively, the PIN1/PIN2
code is locked and cannot be used anymore. (The
remaining number of times for the entry appears on
the screen.) When you enter the correct PIN1/PIN2
code, the number of times for entry is reset to 3.
■PIN Unlock Code (PUK Code)
The PIN unlock code (PUK code) is an 8-digit number
for releasing the lock of PIN1/PIN2 code. You cannot
change the PUK code.
Ex. PIN1 code