NTT docomo FOMA SO706i Instruction Manual page 62

Ringing screen/Videophone
ringing screen (p.59)
Call Rejection......Terminates the receiving call without
answering.
Call Forwarding......Forwards the call.
The call is forwarded regardless of the "Call Forwarding"
setting "Activate/Deactivate".
Voice Mail......Connects the call to the voice mail service
center.
The call is connected to the voice mail service center
regardless of the "Voice Mail" setting "Activate/Deactivate".
Change Display......Switches the display from additional
number 1 or 2 to the number from which the call is
forwarded. This can be selected when receiving multi
number call (for additional number 1 or 2) and the call is
forwarded at the same time.
N
You can receive a call using a flat-plug earphone/
microphone with switch (optional). →p.298
If you have subscribed to the Call waiting, Voice mail
or Call forwarding service, activate "Set in-call arrival"
and set "Incoming Call Mng" to "Answer", you will hear
a short double-beep ("bibip") when you receive a call
when you are already on a call.
• If you subscribe to the Voice mail or Call forwarding
service, you can answer the call by ending the
current call.
• If you subscribe to the Call waiting service, you can
answer the voice call by putting the current call on
hold and you can answer the videophone call by
ending the current call.
You can set the incoming call management from the
caller who is not stored in the phonebook.→p.114
You can set the incoming call restriction for each
phone number stored in the phonebook.→p.112
<Videophone>
It may take a few seconds to switch from a camera
image to a substitute image (Chara-den) depending
on the Chara-den.
When the Other Party
Switches a Voice/Videophone
Call (Caller)
When you receive a voice/videophone call, the other
party can switch the call between voice call and
videophone call.
The receiver cannot switch a voice call to a
videophone call.
To switch the call, the receiver needs to set "Ntfy
switch-mode" to notify the switch beforehand.
→ p.67
You can use this function with the terminals
compatible with voice call/videophone call switch.
60
<Example: When the other party switched a voice call
to a videophone call>
In-call screen (p.48) The other party
1
switches to a videophone call
While switching, the screen which indicates that
the calls are being switched appears and the
voice guidance is played.
When the voice call is switched to the
videophone call, the substitute image is sent to
the other party.
■ When the other party switched a
videophone call to a voice call
Videophone in-call screen (p.48) The other
party switches to a voice call
The videophone call is switched to the voice call.
Using the Dial Keys to
Answer a Call
You can use this setting to turn off the ring tone or
answer the phone quickly when you receive a call.
i "SETTINGS" "Incoming call"
1
"Answer setting" Select any item:
Any key answer......Valid for voice calls. You can
answer the call by pressing any of the following keys.
r, d (Answer) , 0 to 9, q, w, t,
o, p, b
* For videophone calls, you can answer the call only by
ordinary key operations (r, d (Subst.)).
Quick silent......Pressing any of the following keys
or opening the FOMA terminal stops the incoming
call reaction while the caller continues to hear the
ring tone.
0 to 9, q, w, t, b, p or o (for
voice calls only)
To answer the call, press r or d (Answer/Subst.).
<Answer setting>