NTT docomo FOMA SO706i Instruction Manual page 375

"This certificate has expired Connect?"
● This message appears when an SSL server certificate
is received that has expired, or has not reached its
period of validity. Select "YES" to connect. Otherwise,
select "NO".
● This message appears when you try to connect to a
site or Internet page that uses SSL communication, if
you have not made the "Set time" setting. Make the
"Set time" setting. → p.46
"This certificate is not valid for this URL
Connect?"
● The site requested a User Certificate, but the certificate
has expired. It may be possible to display the site by
selecting "YES", but you are advised to download a
new User Certificate. → p.150
"This data can no longer be replayed"
● This message appears when you select and attempt to
run the shortcut icon for an i-motion which has finished
its number of plays.
"This data can no longer be replayed Delete?"
● This message appears when you attempt to play an
i-motion or Chaku-Uta-Full
number of plays. Select "YES" to delete.
"This data is not supported by this phone"
● This message appears when an i-motion could not be
acquired due to incompatible non-i-motion data.
"This data may not be replayed"
● This message appears when the format of the acquired
i-motion is not MP4 (Mobile MP4).
"This site is not certified Connect?"
● This message appears when an unsupported SSL
certificate is received. Select "YES" to connect.
Otherwise, select "NO".
"This software contains an error"
"This software contains an error Unable to
download"
"This software contains an error Unable to move"
"This software contains an error Unable to
update"
● This message appears when the software cannot be
downloaded, updated or moved from a microSD card
because its data is inaccurate.
"This software is not supported by this phone"
● This message appears when the acquired software
cannot be downloaded or moved from a microSD card
because it is not compatible with this FOMA terminal.
"This UIM cannot be recognized"
● This message appears when a UIM that cannot be
used in this FOMA terminal may have been inserted.
Check that the right FOMA card (UIM) is inserted.
→ p.39
"Time out"
● Accessing a site or sending a message was interrupted
because the time, which is set in "Set connection
timeout", has elapsed. Retry later.→p.149
®
which has finished its
"Too much data was entered"
● Too many characters are entered, and the data cannot
be sent. Reduce the number of characters before trying
to resend.→p.139
"Unable to activate 1Seg Please activate after
resetting Self mode or moving to FOMA
coverage"
● 1Seg cannot be activated as 1Seg viewing was
repeated when a communication could not be
established, e.g. in Self mode or out of service area.
Release Self mode or move into FOMA service area to
enable communication, and retry activation.
"Unable to download Data exceeds maximum size
(452)"
● This message appears when data being received
cannot be received because it exceeds the maximum
size.
"Unable to obtain data due to replay restriction
data error"
● The playback period of playback limit for a partially-
acquired Chaku-Uta-Full
remaining data cannot be acquired. The partially saved
data will be deleted.
"Unable to receive"
● This message appears when you attempt to obtain
data and a data error or communication error occurs.
"Unable to retrieve the requested URL (504)"
● Connection to the site failed for some reason. Retry
connection.
"Unable to support this card"
● The FOMA terminal does not support this microSD
card. Use a compatible microSD card. → p.243
"Upper limit has been exceeded Connection
failed"
● The upper limit set for a Limit billing plan (Type Limit
and Family Wide Limit) is exceeded.
"URL address changed (301)"
● The URL has changed because the site has been
relocated. If the URL was registered as a bookmark,
shortcut icon or home URL, re-register it.
→pp.94, 142, 148, 221
"URL is too long to register"
● The URL exceeds 256 single-byte characters, so the
bookmark or URL cannot be registered.
"Usage is currently restricted Try again later"
● This message appears when an extremely high volume
of data communication occurred within a certain period
while using a flat-rate i-mode packet service.
Connection may become impossible for a period, so try
to use i-mode again later.
"Wrong password"
● This message appears when you enter a wrong
password on the password entry screen in viewing or
downloading a PDF document. →pp.145, 261
Continued on next page
®
has expired, so the
373