NTT docomo FOMA SO706i Instruction Manual page 254

MTP mode......Uses the external connector for
WMA data exchange.
• " ": The FOMA USB Cable with Charge Function
01/02 is not connected
• " ": The FOMA USB Cable with Charge Function
01/02 is connected
Using the FOMA Terminal as
a microSD Reader/Writer
You can connect the FOMA terminal to a PC with the
microSD card inserted and read/write the data in the
microSD card.
To use the FOMA terminal as a microSD reader/
writer, the following devices are required.
Item
Cable FOMA USB Cable with Charge Function
01/02 (optional)
PC PC with USB port (compliant with the
Universal Serial Bus Specification
Rev1.1/2.0) compatible with the FOMA
USB Cable with Charge Function 01/02
(optional)
Supported Windows 2000,
OS Windows XP, Windows Vista (Japanese
edition)
USB mode setting screen (p.251)
1
"microSD mode"
When set to "microSD mode", "
2 Connect the FOMA terminal and a PC
with the FOMA USB Cable with Charge
Function 01/02
The " " icon is displayed.
The microSD card is displayed in My Computer
window on the PC as a storage memory
(external storage device).
To remove the FOMA USB Cable with Charge
Function 01/02 from the PC, follow the safe
removal procedure on each OS.
252
Description
" appears.
■ Important
Ensure that the FOMA terminal and PC are properly
connected. An improper connection could not only
prevent data exchange but also result in the loss of data.
Attempting to exchange data when the FOMA
terminal's battery level is low or empty could not only
prevent data exchange but also result in the loss of
data. Make sure that the FOMA terminal's battery is
charged enough. Also, check the power of PC.
Do not remove the FOMA USB Cable with Charge
Function 01/02 while copying the data from the PC to
the FOMA terminal (the center illumination lamp
flashes). This may prevent not only data exchange
but also result in the loss of data.
Setting How to Print Images
Stored on the microSD Card
You can set DPOF (Digital Print Order Format) to the
images stored in the microSD card.
DPOF is a format to print the images shot by digital
camera.
When you save still images shot with the FOMA
terminal to a microSD card, and specify still images
to print, the number of sheets, etc., you can print
the images on a DPOF-compatible printer or in a
print service shop.
1 Folder list screen (p.225) "microSD"
"Picture" Select a folder
u (FUNC) "DPOF setting"
■ To use DPOF set One
Move the frame to the image you want to set on
the image list screen or select the image to
display the My picture screen. When you select
the My picture function menu, go to Step 3.
2 Select the setting
DPOF set One......Sets the print settings for one
image.
DPOF set Choice......Selects images to set DPOF
settings. "About multiple-choice"→p.38
"Print" Select any item:
3
Print Sheets......Enters the number of sheets (01 to
99) to print.
a date......Selects whether to stamp the date.
■ To cancel the print setting of the selected
image
"Print OFF"
<DPOF setting>