NTT docomo FOMA SO706i Instruction Manual page 458

Select the " ダイヤルアップの電話
5
番号" (Phone number for dial-up)
and enter the number of the access
point
You can leave user name and password blank for
mopera U or mopera connection.
To connect to any other provider than mopera U
or mopera, enter the user name and password
specified by the provider or network
administrator in the " ユーザー名 " (User Name)
and "パスワード " (Password) columns as this
screen.
This screen is an example of accessing mopera
U by packet communication.
Click "接続" (Connect) and then click "スキップ" (Skip)
6
To confirm the settings, cancel a connection test.
Click "接続をセットアップします" (Set up the connection) and then "閉じる
7
" (Close)
Open " "→ "接続先" (Access point)
8
Right-click the icon created for the
9
dial-up and click " プロパティ "
(Properties)
Confirm the settings on the " 全般"
10
(General) tab
If two or more modems are connected to the PC,
confirm that only "モデム− FOMA SO706i"
(Modem - FOMA SO706i) is checked in the "接続
の方法 " (Connection method) column. If not,
check it.
Confirm that " ダイヤル情報を使う " (Use Dial
Information) is unchecked. If not, uncheck it.
37