NTT docomo FOMA SO706i Instruction Manual page 92

Setting the Color for
Incoming Call Display
You can display names, phone numbers or mail
address on the Redial/Received calls screen or sent/
received address list screen with their font color
changed.
i "SETTINGS" "Incoming call"
1
"Disp. call/receive No." Select a color
■ To revert the setting to the original
p (Reset)
N
Press o (Change) to switch the number of colors to be
selected from 16 to 256. The pallet of 16 colors and 256
colors switches each time you press o (Change).
This setting may change depending on the "Color
pattern" setting. To return to the setting corresponding
to "Color pattern", press p (Reset) after changing this
setting.
When you use 2in1, information of Number A/Address
A are displayed in the color set in this function. To
display the information of Number B/Address B in
different color, set "Disp. call/receive No." of "2in1
setting".
Preventing Others from
Peeping the Screen
You can make it difficult for others to see the contents
on the display.
2 (1 second or longer)
1
Shield view is set and "
■ To release the setting
2 (1 second or longer)
N
You cannot set or release shield view during editing
the text or i-αppli is activated.
90
<Disp. call/receive No.>
<Shield view>
" appears.
Setting the Display and
Keypad Lighting
i "SETTINGS" "Display"
1
"Backlight" Select any item:
Lighting......Selects "ON" or "OFF".
Enter the waiting time for the Power saver mode (01
to 20 minutes in 2 digits) when you set the Power
saver mode to "ON".
• You can also change the backlight operation (ON/
OFF) with 5 (1 second or longer).
• Setting the normal lighting settings for the
backlight to "OFF" displays the "
standby screen.
• If you set the Power saver mode to "ON", the
standby screen turns off when the specified
waiting time has elapsed. If any key is pressed
during the Power saver mode, the Power saver
mode is canceled.
Charging......Selects "Standard" or "All time ON".
• When set to "Standard", the backlight lights up
with the setting of Lighting ON (not enter Power
saver mode).
• When set to "All time ON", the backlight of the
screen lights up all the time (when there is no
operation for about 15 seconds, the brightness is
set to "Dark").
Area......Selects "LCD+Keys" or "LCD".
Brightness......Selects backlight brightness from
"Bright/Middle/Dark".
N
When "Lighting" is set to "ON", the backlight turns on
when a call is received and lights for about 15 seconds
when you turn the FOMA terminal on, press one of the
keys, or unfold the FOMA terminal. The backlight also
stays on while using the camera or playing a movie/
i-motion. If you select "OFF", the backlight does not
turn on. However, the backlight turns on during movie
shooting regardless of the "Lighting" setting.
<Backlight>
" icon on the