NTT docomo FOMA SO706i Instruction Manual page 246

Inserting/removing the microSD card
Insert or remove the microSD card after turning off
the FOMA terminal.
Open the cap of the microSD card slot
1
2 Insert the microSD card into the
microSD card slot and push it until it
locks into the place
Insert the microSD card straight and slowly with
the printed side up.
When fully inserted, the card is locked in the place.
■ To remove the card
When you push the microSD card in and
release, the card pops up slightly.
* Note that the card may fly out of the slot.
Grip the groove of the microSD card and slowly
pull the card out.
3 Close the cap of the microSD card slot
When you turn on the FOMA terminal after
inserting the microSD card, "
N
Do not insert or remove the microSD card with the
FOMA terminal turned on. Doing so may damage the
microSD card or the data on the card.
Note that the microSD card may fly out of the slot
when inserting or removing the microSD card.
When you remove the microSD card, make sure to
keep the card in the supplied protective case. You may
not be able to use the microSD card if the card is kept
in different protective case.
Make sure to insert or remove the microSD card
straightly in the right direction (inserting the microSD
card at an angle may damage the card).
244
N
Folder tree on the microSD Card
When you copy the data from the FOMA terminal to
the microSD card, folders are created as shown in the
Table 1 (p.245) and the data are stored on the
respective folders. The folder name and file names
are set automatically as shown in the Table 1.
N
microSD card
slot cover
The printed
side up
Groove of the
microSD card
" appears.
It may take long to read or write data for the first time
after the microSD card is inserted.
When the data is copied from a PC to the microSD
card, the folder structure and file name shown in
the Table 1 (p.245) are needed.
When you copy multiple data to the SD_PIM folder,
the data is automatically named with year/month/day/
hour/minute (yyyy/mm/dd hh:mm).
You can save a movie with video from a PC to the
MMFILE folder, but you cannot play the movie on the
FOMA terminal.
A file edited on a PC then saved to the microSD card
may not be displayed or played correctly on the FOMA
SO706i if you use characters different from the folder/
file names shown in Table 1 (p.245).
File names of PDF data/documents copied to a
microSD card remain unchanged (up to single-byte 59
characters/double-byte 29 characters). If a file name is
the same as that of an existing file stored in the
microSD card, a 3-digit number will be added to the
original file name.
When the microSD card is formatted and
SDVIDEO.DAT, MMFILE.DAT or DCIM.DAT file is
deleted, the settings of the destination folder are
canceled. In this case, reset the setting of "Select to
save".
Do not delete or move folders in the microSD card on
a PC. Doing so may prevent FOMA SO706i from
reading the microSD card.
You may not be able to display or play the data on the
microSD card stored from the other device. Also, you
may not be able to display or play the data on the
microSD card stored from the FOMA terminal on the
other device.
Before purchasing the microSD card reader/writer or
PC card adapter, ask the manufacturer of the microSD
card if it is available for the FOMA SO706i.