Specifying Your I-Mode Settings - NTT docomo FOMA SO706i Instruction Manual

Using Location Information
Select a link with location information added on a site,
use the location information.
<Example: To use the information on a site>
Sites screen (p.136) Select a link with
1
location information added Select any
item:
Run i-αppli......Displays the list of i-αppli
compatible with the location information function
(that can use location information).
Read a Map......Accesses the i-mode site and
displays the peripheral map, etc. using the location
information.
*
......Pastes the location information
Paste to mail
URL into an i-mode message to compose a new
message.
* : Not available when 2in1 is in B mode.
N
When the location information URL is pasted into the
message, " " is prefixed to the location information
URL.
The number of characters of the pasted location
information URL is counted as the number of
characters of the message.
Specifying Your i-mode
Settings
o "i-mode settings"
1
The "i-mode settings" screen
appears.
2 Select any item:
Scroll......Sets the scrolling speed and link display
of the detail screen for a site, screen memo or
MessageR/F.
Speed (default: High speed)......Selects the
scrolling speed from "High speed/Low speed".
During scroll in focus
whether to highlight the linked pages while
scrolling.
148
i-mode settings
(default: OFF)......Sets
Font size (default: Standard)......Selects the
character size of the detail screen for a screen
memo, MessageR/F or a page on a site, from
"Small/Standard/Large/X-large".→p.93
Set image disp. (default: ON)......Sets whether the
detail screen for screen memos and pages on a site
are displayed or not. If you select "OFF", the "
icon will be displayed instead of the images not to be
displayed.
i-motion auto-replay
Auto-display setting
......Sets for the automatic display of MessageR/F.
Start attachment (auto)
whether the attached/pasted melody automatically
plays when opening the MessageR/F.
Use phone information
Message list display
number of lines in the message list screen.
Home URL......Sets for using the home URL display
function. When set to "Valid", pressing a on the
standby screen displays the screen of the stored
URL. You can enter up to 256 single-byte characters
for the URL.
Invalid (default)......Disables the home URL
display setting.
Valid......Enables the home URL display
setting.
Select the Home URL field and enter a URL to
be stored.
Sound effect (default: ON)......Sets whether to play
the sound effects for the Flash movies in a site or
screen memo.
Tab display setting (default: Open at the back side)
......Sets whether to change (Open at the front) or
keep (Open at the back side) the current display
when you open a website in new window.
Check settings......Displays the settings set in
"i-mode settings".
Reset......Resets the settings specified in "i-mode
settings" to the default settings.
N
<Home URL>
If a flat-plug earphone/microphone with switch
(optional) is connected to the FOMA terminal,
pressing the switch in the standby screen will also
display the site set as the home.
<Sound effect>
Even if sound effects are set to "ON", some Flash
movies may not make any sound.
(default: ON) → p.152
(default: MessageR preferred)
(default: ON)......Sets
(default: Accept)→ p.149
(default: 2 lines)......Sets the
"