NTT docomo FOMA SO706i Instruction Manual page 476

AT command
ATS30= Disconnects the line when
n
there is no user data
exchange for the time set in
this command.
[&F]
ATS103= Sets the called sub address
n
character.
[&F]
ATS104= Sets the calling sub address
n
character.
[&F]
ATV Specifies whether the result
n
code is returned in numerals
or alphabets.
[&F] [&W]
ATX Specifies whether the speed
n
indication is present in the
CONNECT display when
connecting the line.
Also detects a busy tone or
a dial tone.
[&F] [&W]
ATZ Resets the current setting to
the contents of the non-
volatile memory.
If this command is input
during communication, the
line will be disconnected.
+++ In response to the escape
sequence, the online data
mode changes to the online
command mode while
maintaining the line
connection.
Outline
= 0 : Inactive timer off (initial value)
n
= 0 - 255
n
Where n is the number of minutes.
= 0 : ＊
n
= 1 ： / (initial value)
n
= 2 ： ¥ (¥ mark or back slash)
n
= 0 : #
n
= 1 : % (initial value)
n
= 2 : &
n
= 0 : Returns the result code in numeral
n
= 1 : Returns the result code in characters
n
= 0 : Without dial tone detection; without
n
= 1 : Without dial tone detection; without
n
= 2 : With dial tone detection; without
n
= 3 : Without dial tone detection; with
n
= 4 : With dial tone detection; with busy
n
−
−
55
Parameter/description
value.
(initial value).
busy tone detection; without speed
display.
busy tone detection; with speed
display.
busy tone detection; with speed
display.
busy tone detection; with speed
display.
tone detection; with speed display.
(initial value)
Command execution example
ATS30=0
OK
ATS30?
000
OK
ATS30=?
ERROR
ATS103=0
OK
ATS103?
000
OK
ATS103=?
ERROR
ATS104=0
OK
ATS104?
000
OK
ATS104=?
ERROR
ATV1
OK
ATX1
OK
(Online command
mode)
ATZ
NO CARRIER
(Offline command
mode)
ATZ
OK
(Online data mode)
+++ (No display)
OK