NTT docomo FOMA SO706i Instruction Manual page 456

Notifying or Not notifying the Caller ID
d You can set whether to notify the other person of your caller ID when packet communication is carried
out. Since the caller ID is important information, please take care when you send your caller ID.
d You can set up the Notify or not notify Caller ID setting using the AT command prior to a dial-up connection.
d Use the ＊DGPIR command (p.48) to notify or not notify the caller ID or change back to "Not set"
(Default value).
Start "ハイパーターミナル" (Hyper terminal)
1
For how to start Hyper terminal, see
Set up Notify (186) or Not notify
2
(184) Caller
communication
Enter in the format of "AT ＊ DGPIR=<
To automatically attach 184 (Not notify) for
dialing an outgoing call/answering an
incoming call
Enter the following:
AT＊ DGPIR=1
To automatically attach 186 (Notify) for dialing
an outgoing call/answering an incoming call
Enter the following:
AT＊ DGPIR=2
Confirm that "OK" appears and
3
click "ハイパーターミナルの終了"
(Close Hyper terminal) in the "ファ
イル" (File) menu
NOTE
d The Caller ID needs to be set to "Notify" to use DOCOMO's internet connection service mopera U or mopera.
"
Setting up the access point (APN)
ID for packet
>".
n
35
" (p.32).