NTT docomo FOMA SO706i Instruction Manual page 427

■ Packet communication and 64K data communication
Download and Install the FOMA communication setting file (drivers) /Connect to PC
a Install the FOMA communication setting file from the "CD-ROM for FOMA SO706i" or by downloading from the DOCOMO
website. →p.9
a Connect the FOMA terminal to the PC with the FOMA USB Cable with Charge Function 01/02 (optional). →p.7, 9
<To set up the access point using
FOMA PC setting software>
Install the FOMA PC setting software
a Enables you to use the FOMA PC setting software. "Installing the FOMA PC
Setting Software"→p.14
<For packet
communication>
Set up
*
a mopera U, mopera
→p.19
a Other providers →p.20
Connect and disconnect
a Connect →p.24
a Disconnect→p.26
*： To use Internet with the FOMA terminal and PC connected, "mopera U" (you need to apply for) is useful, which supports
broadband connection, etc. Consider the plan in which you are charged only in a month when you use the service. If you use
"mopera" for which you do not need to apply, you can access Internet immediately.
For more information, visit the DOCOMO website.
<For 64K data
communication>
Set up
*
a mopera U, mopera
→p.22
a Other providers →p.23
6
<Not using FOMA PC
setting software>
Set up
a Set up communication not using the
FOMA PC setting software→p.29
Connect and disconnect
a Connect →p.45
a Disconnect→p.46