<Completion of the connection>
When the connection is complete, a message
appears from the indicator of the taskbar
located on the bottom-right of the desktop for
a few seconds (The completion of the
connection screen may appear depending on
the OS. Click "OK").
You can start browser software to view sites
and websites or to use e-mail.
If this message does not appear, check
"Setting up Dial-up Network" (p.29) and
"Setting up Dial-up" (p.36).
See p.25 for communication conditions.
How to disconnect
Just closing the Internet browser may not disconnect the communication line. Follow the instructions
below to disconnect for sure. This section describes an example using Windows XP.
Click the dial-up icon in the task-tray
1
The connection condition screen for Internet will be
displayed.
For Windows Vista
Open "
" → " 接続先 " (Access point)
Select the dial-up currently connected.
Click "切断" (Disconnect)
2
NOTE
d The communication speed displayed on the PC may be different from the actual communication speed.
46
Dial-up icon