Launching I-Αppli Automatically; Launching An I-Αppli From A Site Or Mail; I-Αppli To - NTT docomo FOMA SO706i Instruction Manual

Launching i-αppli
Automatically
You can set the software to launch automatically at
the specified date and time or interval of time.
Enabling automatic launching
You can set 3 automatic startup times for each
application.
Set to "OFF" at the time of purchase.
i "I-APPLI" "Auto-start set" "ON"
1
or "OFF"
Setting the launch date/time
You can specify the date and time to launch the
software automatically.
Software does not start up automatically in the
following cases:
• When the FOMA terminal is turned off
• When another function is running
• During calls
• During communication
• When the time for Software Update, Alarm,
Schedule, To Do list or 1Seg booking program is
the same as Auto-start time
• If the time to launch is set within 10 minutes after
the same application is automatically launched
for the last time
Software list screen (p.187)
1
u (FUNC) "Auto-start time" Use c
to select a checkbox ( □ )
■ To enable the time interval set for the
software
Check the "Time interval set" checkbox
■ To set the launch date and time
Check the "Start time set" checkbox
o (Finish) Set the launch date and
2
time
■ To set the launch date and time
Select a date and time Enter the launch date
and time
■ To set the automatic launch repetition
Select the repeat setting item "Daily" or
"Weekly"
If you select "Weekly", use c to select a
checkbox ( □ ) and press o (Finish).
3
Checking whether an i-αppli launched
automatically
You can check whether an i-αppli automatically
started up at the specified time.
You can also check for the software whose
<Auto-start set>
launching from the IC card function failed.
1
<Auto-start time>
N
If the software could not be launched automatically,
the "
standby screen. Select the icon to view the Auto-start
info screen. Select software that could not be
activated.
Shortcut icons that provide information → p.94
Launching an i-αppli from a
Site or Mail
You can launch an i-αppli from a function other than
i-αppli, such as an i-mode site or mail.
Enabling software launching with
i-αppli To
You can specify whether i-αppli software can be
launched from i-mode sites, mail, the Infrared data
exchange function, Bar code reader, IC card function,
ToruCa or data broadcast.
This setting can be specified separately for each
software application.
1
2
o (Finish)
i "I-APPLI" "i-αppli action info"
"Auto-start info"
The screen displays information such as the
software name, the automatic launch time and
whether or not the software was launched.
"StartO" indicates that the software started up
automatically, "StartX" indicates that it did not
start up automatically and "Start-" indicates that
the time for automatic launch has not yet been
reached.
" (Not run soft) shortcut icon appears on the
Software list screen (p.187)
u (FUNC) "Set i-αppli To"
Use c to select □ (checkbox)
o (Finish)
<i-αppli To>
<Set i-αppli To>
197