NTT docomo FOMA SO706i Instruction Manual page 325

N
When 2in1 is set to OFF, you can also perform "2in1
settings" by pressing 8 for 1 second or longer on
the standby screen.
<Mode switching>
You can also change mode by pressing 8 for 1
second or longer on the standby screen.
<Phonebook 2in1 setting>
You cannot set this function to UIM phonebook
entries.
Select "Display detail" from the function menu to
display "Phonebook detail" screen from "Phonebook
list" screen in this function.
<Standby display>
When Change Mode is set to A mode, standby
screens are displayed according to "Display setting".
When set to the Kisekae Tool you downloaded, the
i-αppli standby screen or the random display, the
default screen appears even when "Same as Number
A" is set.
<Disp. call/receive No.>
Names, phone numbers and mail addresses in the
screens below will be displayed in the set color.
• In-call screen
• Dialing/Receiving screen
• Redial/Dialed calls (list/detail)
• Received calls (list/detail)
*
• Sent /Received address record screen (list/detail)
• Chaku-moji Sent messages record screen
* : In B mode, the screen for sent addresses cannot be
displayed.
The setting for Number A/Number B (Address A/
Address B) applies to each screen even when 2in1 is
set to OFF.
<Ringtone for Number B>
When making the same settings to Number A and
Address A, set each item as "Same as Number A".
When the ring tone settings are duplicated, the priority
applies. → p.83
When you receive a call without caller ID on Number
B, priority is given to the "Ringtone for Number B"
setting.
Switching phone numbers each time
when making a call
When 2in1 is set to ON and the mode is set to Dual
mode, phone numbers can be switched when making
a call.
This function is available only on the detail screen
of "Phonebook/Received calls/Dialed calls/Redial".
<Example: To make a call using the phonebook>
Phonebook detail screen (p.73)
1
u (FUNC) "Dial setting" "2in1/Multi
Num." Select any item:
Number A......Allows calls to be made from Number
A.
Number B......Allows calls to be made from Number
B.
Cancel number......Releases the setting and allows
calls to made according to Phonebook 2in1 setting.
N
"2in1/Multi Num." in the function menu cannot be
selected when the mode is set to A mode or B mode.
When the following operations are performed, the
phone number selection screen is displayed and the
phone number to use can be selected.
• When making calls by entering phone number in the
phone number entry screen
• When using services from the special number
registered in Additional service
• When "Dialing" from the function menu in Sent/
Received address list is selected
• When using the Phone to function
• When pressing the switch on the flat-plug earphone/
microphone with switch (optional) on the phone
number entry screen
Dialing or AT command dialing from an external device
uses Number A for A mode/Dual mode and Number B
for B mode.
323