NTT docomo FOMA SO706i Instruction Manual page 321

Multi Number
You can add and use the maximum of two additional
numbers (additional number 1 and additional number
2) other than the basic number as the phone numbers
of the FOMA terminal.
Cannot be used with 2in1 at the same time.
The name stored for the multi number (basic
number, additional number 1/2) respectively
appears on the screen when making or receiving a
call.
When you make a call using the Redial/Received
calls record, the multi number used for making or
receiving a call at the last time is displayed and the
call is made from the number.
Using Multi Number
i "SERVICE" "Multi Number"
1
Select any item:
Set Multi Number......Specifies the phone number
you use for ordinary calls.
Basic Number
subscribed phone number (basic number).
Additional Number1・Additional Number2
......Sets to call from the additional number.
Check setting......Checks the current Multi number
settings.
Number Setting......Registers the additional
number notified at the subscription of the Multi
number to the FOMA terminal.
Highlight the item to register (or change) the
additional number o (Edit) Enter the name
Enter the additional number
You can enter up to 8 double-byte or 16 single-byte
characters for the name and you can enter up to 26
digits for the additional number.
• About the function menu of the "Multi Number
setting" screen which appears when "Phone
number record" is selected. →p.319
Select ring tone......Sets the ring tone for the
received calls to the additional number 1 and
additional number 2 respectively. → p.82
* : When the name is changed, registered name
appears respectively.
N
If you remove the FOMA card (UIM) or change to
other FOMA card (UIM), the multi number settings
data (names and phone numbers, etc) on the FOMA
terminal may be erased. In this case, saving the data
again.
<Multi Number>
*
......Sets to call from the
N
<Number Setting>
The name appears when you make various settings of
the multi number function or when you select a phone
number to use for each call.
<Select ring tone>
Refer to p.83 for the priority when the ring tone
settings are duplicated.
Multi Number setting screen
(p.319)
Edit......Edits the name in the basic number or the phone
number in the additional number.
Delete this......Deletes one name in the basic number or
one name and phone number in the additional number.
Delete all......Deletes all names in the basic number and
all names and phone numbers in the additional number.
Switching the phone number for each
call
You can switch the phone number each time you
make a call.
*
Enter phone number screen (p.48)
1
u (FUNC) "Multi Number" Select
any item:
*
Basic Number
phone number (basic number).
Additional Number1・Additional Number2
Sets to call from the additional number.
Cancel number......Cancels the setting, allowing
you to dial following "Set Multi Number" setting.
* : When the name is changed, registered name
appears respectively.
N
You can also switch the phone number from the
function menu of phonebook detail screen, detail
screen of Redial/Dialed calls/Received calls records,
etc.
......Sets to call from the subscribed
*
......
319