NTT docomo FOMA SO706i Instruction Manual page 58

N
Even when you receive a call whose ring tone
sounded for shorter time than the time set in the "Set
mute seconds" of "Ring time (sec.)", Chaku-moji is
displayed and recorded in the Received calls record.
Depending on the status of the sender or receiver,
Chaku-moji may not be displayed even if you receive a
call with Chaku-moji.
When the Original lock is set to "Chaku-moji", Chaku-
moji is not displayed even if you receive a call with
Chaku-moji. In this case, Chaku-moji is stored to the
Received calls record after releasing the lock.
● Displaying a message from the
Received calls record
When you receive Chaku-moji, the "
appears on the Received calls record, and you can
check the Chaku-moji message on the "Received
calls screen (detail)".
N
Even when you make a call using the Received calls
record, the Chaku-moji in the record is not sent.
Editing and setting messages
i "SERVICE" "Chaku-moji"
1
Select any item:
Create message......Stores
or edits frequently used
Chaku-moji. You can store up
to 30 Chaku-moji (including 5
pre-installed).
Highlight an item to be
stored or edited o (Edit)
Enter the Chaku-moji
MSG display settings......Sets the Chaku-moji display
setting when you receive a call with Chaku-moji.
Display all messages......Displays all Chaku-
moji messages.
Only number in
the Chaku-moji messages from senders stored
in the phonebook.
Calls with Caller
Chaku-moji messages from senders providing
the caller ID.
Hide all messages......Hides all Chaku-moji
messages.
56
" icon
Create message list
Function menu p.56
PH-book......Displays only
ID......Displays only the
Create message list screen
(p.56)
Edit......Edits Chaku-moji.
Delete......Selects the deleting method from "Delete this/
Delete selected/Delete all".
"About multiple-choice" →p.38
N
You cannot delete the pre-installed Chaku-moji. Even
when you change a pre-installed Chaku-moji and
delete the Chaku-moji, it is restored to the default.
Setting Caller ID Notification
Set whether to display your phone number (caller ID)
on the other party's phone (display) each time you
make a call.
Take care when informing others of your phone
number, as this is important personal information.
You can set Caller ID Notification all at once. → p.46
Adding the "186"/"184" prefix to the
other party's phone number
To provide your caller ID, add the "186" prefix when
you dial the phone number. To withhold your caller ID,
use the "184" prefix.
■To provide your phone number
186 - "The other party's phone number" - r (voice
call)/o (V.phone)
■To withhold your phone number
184 - "The other party's phone number" - r (voice
call)/o (V.phone)
Selecting from the function menu
Select "OFF" or "ON" from the function menu the
"Enter phone number" screen and the detail screens of
"Phonebook"/"Received calls"/"Dialed calls"/"Redial".
<Example: To make a voice call from the Enter phone
number screen>
1 Enter the phone number of the other
party
u (FUNC) "Notify Caller ID" "OFF"
2
or "ON"
■ To cancel "Notify Caller ID"
"Cancel prefix"
When "Cancel prefix" is selected, the "Caller ID
Notification" setting is applied.