NTT docomo FOMA SO706i Instruction Manual page 386

Updating pattern data
Scanning function screen (p.383) "Update" "YES" "YES"
1
Ｕｐｄａｔｅ
Ｕｐｄａｔｅ ｐａｔｔｅｒｎ
ｄｅｆｉｎｉｔｉｏｎｓ？
ＹＥＳ
ＮＯ
* If no pattern data update is required, the "Pattern definitions are up-to-date" message appears. Continue
using your current pattern data.
N
You cannot update the pattern data when the update information is notified from the network, when other function is
activated, or during i-mode communication, packet communication or international roaming.
Updating pattern data automatically
Scanning function screen (p.383) "Set auto-update" "ON" "YES" "YES"
1
The scanning results display
■ Displaying problems detected by scanning
Ｆｏｌｌｏｗｉｎｇ ｐｒｏｂｌｅｍｓ
ｗｅｒｅ ｄｅｔｅｃｔｅｄ
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ１
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ２
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ３
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ４
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ５
Ｏｔｈｅｒ：ｘｘｘｘ
Ｒｅｔｕｒｎ
■ Results of scanning
Warning level 0
Ｏｐｅｒａｔｉｏｎ ｍａｙ ｎｏｔ
ｒｕｎ ｐｒｏｐｅｒｌｙ
d (Set)...Continues d (Cancel)...Stops
the operation. and cancels the
operation.
o (Continue)...
Continues the
operation.
N
A message other than the above may appear depending on the condition.
Checking the pattern data version
Scanning function screen (p.383) "Version"
1
384
Ｕｐｄａｔｅ
Ｒｅａｄｙ ｔｏ ｓｅｎｄ
ｙｏｕｒ ｔｅｒｍｉｎａｌ ＩＤ？
ＹＥＳ
ＮＯ
A list of up to 5 problems detected by the Scanning function is displayed, starting with
the highest-level problem. If 6 or more problems were detected, the names of the 6th
and subsequent problems are omitted.
The rest of the problem elements (sixth and later), of which names are omitted, are
displayed as follows:
1 to 9998: The remaining count is displayed as it is.
9999 or more: "Other:9999" is displayed regardless of the count.
Warning level 1 Warning level 2
Ｏｐｅｒａｔｉｏｎ ｍａｙ ｎｏｔ Ｏｐｅｒａｔｉｏｎ ｍａｙ ｎｏｔ
ｒｕｎ ｐｒｏｐｅｒｌｙ
Ｃａｎｃｅｌ ｏｐｅｒａｔｉｏｎ？ Ｃａｎｃｅｌｉｎｇ ｏｐｅｒａｔｉｏｎ
d (Set)...Stops and
cancels the operation.
Warning level 3
Ｏｐｅｒａｔｉｏｎ ｍａｙ ｎｏｔ
ｒｕｎ ｐｒｏｐｅｒｌｙ ｒｕｎ ｐｒｏｐｅｒｌｙ
Ｄｅｌｅｔｅ ｄａｔａ？
o (Delete)...Deletes
the data and cancels
the operation.
d (Back)...Stops
and cancels the
operation.
<Pattern data update>
<Set auto-update>
Warning level 4
Ｏｐｅｒａｔｉｏｎ ｍａｙ ｎｏｔ
ｒｕｎ ｐｒｏｐｅｒｌｙ
Ｄｅｌｅｔｉｎｇ ｄａｔａ
d (Set)...Deletes the
data and cancels the
operation.
<Version>