Functions - NTT docomo FOMA SO706i Instruction Manual

■ To cancel the Auto timer settings
u (FUNC) "Auto timer" "OFF"
■ To stop the timer while it is running
o (Quit) or t
N
During the Auto timer countdown, you can shoot
manually by pressing d (Record).
The Auto timer cannot be used in M-Continuous
mode.
Using the Bar Code Reader
The FOMA terminal can scan JAN codes and QR
codes using the camera. The scanned data can
be used for displaying/copying the text, using the
functions of Phone To/AV Phone To, Mail To, Web
To, i-αppli To, or adding to bookmark/phonebook
especially in QR code. The FOMA terminal can
also scan the image, melody or ToruCa data to
play or save.
The FOMA terminal can save up to 5 scanned bar
codes.
Hold the FOMA terminal firmly to ensure that it
does not shake during the scanning.
When scanning bar codes, use the rear camera
and hold the FOMA terminal about 6 to 8 cm away
from the scanned code.
■JAN codes and QR codes
JAN code
A bar code consisting of
vertical lines (bars) of
various widths and
spaces to represent
numbers. The FOMA terminal can scan 8-digit
(JAN8) and 13-digit (JAN13) bar codes.
* When the FOMA terminal scans the JAN code on the
right above, it is displayed as "4942857113068".
QR code
A type of two-dimensional codes
consisting of the horizontal and
vertical patterns to represent
numbers, alphabets, kanji, kana or
pictographs. Some QR codes
express images or melodies. Some data are
divided into several QR codes.
* When the FOMA terminal scans the QR code on the
right above, it is displayed as "株式会社 NTT ドコモ"
(NTT DOCOMO, INC.).
<Bar code reader>
Scanning codes
Before scanning, set to the close-up mode by
moving the lens selector switch to
lens). → p.118
i "LIFEKIT" "Bar code reader"
1
Position the JAN code or QR code
2
inside the recognition field
The scanning starts
automatically.
The recognition field is
┏
expressed using " ,
" at the corners of the
┛
screen.
Focus the JAN code or QR
code so that the entire
code is displayed as big as
possible inside the
recognition field.
Finishing the scan plays the completion sound.
It may take time to scan the data.
■ To cancel the scanning
d (Quit)
"OK"
■ To adjust the zoom
j: Zooms in.
h: Returns to default.
■ To scan the data consisting of several QR
codes
"OK" d (Read)
inside the recognition field
The FOMA terminal can scan up to 16 QR codes
expressing one data.
Check the scanned data
3
■ To discard the scanned data
t "YES"
u (FUNC)
4 "Store" "YES" "OK"
The scanned data is saved.
N
The FOMA terminal cannot scan a code if it is not a
JAN code or QR code. You may be unable to scan
some bar code, depending on the size.
The FOMA terminal may fail to scan the code,
depending on the scratch, stain, damage, print quality,
the reflection of light or the QR code version.
You can also run the Bar code reader from the text
editing screen. The scanned data is entered in the
screen.
Some scanned images cannot be saved depending on
the image size or file size.
Continued on next page
(macro
┓
, ,
┗
Scanning
Function menu p.130
Position the QR code
129