Smart Cover; Navigation Key; Security - NTT docomo MONO MO01J Instruction Manual

docomo service initial settings : Set docomo service settings
all at once.
Switch USB debugging : Configure settings for using a
dedicated terminal at a docomo Shop.
Open source licenses : Show open source licenses.
Information
◆
･
You can disable some applications displayed in docomo service/
cloud. Disabled applications may not be displayed in the list of
docomo service. Also, if you newly download an application
provided by DOCOMO, an item may be added in the list of docomo
service/cloud.

Smart cover

Make settings for using the terminal with Smart cover for MONO MO-
01J (commercially available) attached.
1
From the Home screen, [Settings]
cover]
2
Set each item
Screen wake-up : Set whether to turn on the backlight of the
screen when you open the Smart cover. When it is set to ON, the
terminal goes into sleep mode when the cover is closed.

Navigation key

Change the function for assigning to the navigation key.
1
From the Home screen, [Settings]
key]
2
Select an item

Security

Make various settings for security.
1
From the Home screen, [Settings]
2
Set each item
Screen lock :
Make pattern visible
entering pattern.
→ [Smart
Automatically lock
screen after the terminal goes into sleep mode if you set an
unlock method that authentication is needed.
Power button instantly locks
screen immediately by pressing
Lock screen message : Set a message to be displayed on the
lock screen.
Smart Lock : Set to unlock by carry-detection function, or
device, place, voice sound, or registered in advance if you set an
unlock method that authentication is needed.
Encrypt phone : The internal storage is encrypted by default. If
"Screen lock" is set, unlocking screen by the method set in
"Screen lock" is required every time you turn on the power.
Set up SIM card lock :
96
P.98
→
*1
: Set whether to show pattern when
*1
: Set a time to automatically lock the
*1
: Set whether to lock the
O
.
P.99
→
[Navigation
→
[Security]
→
Settings