Managing The Flash Filing System; Viewing The Contents Of The Flash Memory; Viewing The Default Image - Avaya M770 User Manual

Managing the Flash Filing system

The following commands enable you to manage the flash memory.

Viewing the contents of the flash memory

You can view all files that are held in flash memory. A maximum of 15 files can be
saved in flash memory. For each file in the directory the following information is
displayed:
• The type of file.
• The size of each file in bytes.
• The name of the file.
• The default configuration file is distinguished with a "+" (plus) sign, next to the
file type.
• The default boot loader image file is distinguished with a "+" (plus) sign, next
to the file type.
• The default main image is distinguished with an "*" (asterisk), next to the file
type.
• Any main image file that is compressed, is indicated with the letter "C".
• Any main image file that is uncompressed, is indicated with the letter "U".
• Also displayed are comments attached to files.
To display a listing of the flash memory bank, use the flash
directory command.
Command:
Output:
Note: A maximum of two main image files and two boot loader files are allowed in
flash memory. A total of 15 files are allowed (including snapshot files).

Viewing the default image

The default image is the software image that will be run when the Avaya M770 boots
up.
To display the default image, use the flash default command.
Command:
Output:
Avaya M770 ATM Switch User's Guide
Chapter 19
M15-155s8:/>flash directory
Flash Filing System contains 6 files
BOOT+ 343557
BOOT 376442
TEXT 5516
MAIN U) 1598440
MAIN* C) 494710
CONFIG+ 1024
M15-155s8:/>flash default
The current default boot image is "m770ATM".
Upgrading Avaya M770 ATM Switch Software
boot_loader.1.2.7
boot_loader.1.2.0
snapshot_config.1.2 - do not delete
m770ATM.1.1.7
m770ATM.1.2.0
snapshot_1.2.0
245