Show Ip Route Command; Show Image Version Command; Show Snmp Command - Avaya P333T User Manual

Show ip route Command

Use the show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
Example:
Cajun_P330-N> show ip route
Destination
-----------
149.49.1.1
190.20.0.0
172.20.0.0

Show image version Command

Use the show image version command to display the software version of the
image on both memory banks of a specified module.
The syntax for this command is:
show image version [<mod_num>]
If no module number is specified, the image version of the all modules will be
displayed.
Example:
Cajun_P330-N> show image version 1
Mod
-----
1
1

Show snmp Command

Use the show snmp command to display SNMP information.
The syntax for this command is:
show snmp
Avaya P333T User's Guide
Gateway
-----------
172.20.22.201
172.20.22.202
172.20.22.96
Module-Type
----------------
24x100Base-F (MT-RJ) with optional
expansion slot
24x100Base-F (MT-RJ) with optional
expansion slot
Chapter 6 Cajun Campus CLI – Layer 2
Bank
-----
A
B
Version
-------
3.0.5
3.0.5
45