Setting The Parameters - Avaya P332G-ML Quick Start Manual

Setting the Parameters

If you wish to change the default parameters shown and configure the mandatory
parameters, we recommend that you use the Command Line Interface (CLI).
For further information, please refer to the Avaya P332G-ML User's Guide.
Main Default Switch Parameters
Configuration Parameter
Avaya P330 IP Address
Subnet Mask
Default Gateway
VLAN Management ID
Spanning Tree
SNMP Communities
Read-only
Read-Write
Traps
User Name/Password
Keep Alive frame transmission
Network time acquisition
Main Default Port Parameters
Configuration Parameter
Port Speed
Flow Control
5 5
Administrative State
Auto-negotiation
Port VLAN ID
Tagging Mode
Port Priority
*Ensure that the other side is also set to Autonegotiation enabled
Default Setting
149.49.35.214
255.255.255.0
0.0.0.0
1
Enabled
Public
Public
Public
root/root
Enabled
Enabled, TIME Protocol
Default Setting
1000 Mbps, Full Duplex
Disabled (no pause)
Enabled
Enabled*
1
Clear
0