Options And Peripheral Equipment - Mitsubishi MR-JE-200A Instruction Manual

9. OPTIONS AND PERIPHERAL EQUIPMENT

9. OPTIONS AND PERIPHERAL EQUIPMENT
WARNING
CAUTION
The following items are the same as MR-JE-_A servo amplifiers. For details, refer to each section indicated
in the detailed explanation field. "MR-JE-_A" means "MR-JE-_A Servo Amplifier Instruction Manual".
Cable/connector sets
Regenerative option
Junction terminal block MR-TB50
MR Configurator2
Selection example of wires
Molded-case circuit breakers, fuses, magnetic contactors
Power factor improving AC reactor
Relay (recommended)
Noise reduction techniques
Earth-leakage current breaker
EMC filter (recommended)
Before connecting options and peripheral equipment, turn off the power and wait
for 15 minutes or more until the charge lamp turns off. Otherwise, an electric
shock may occur. In addition, when confirming whether the charge lamp is off or
not, always confirm it from the front of the servo amplifier.
Use the specified peripheral equipment and options to prevent a malfunction or a
fire.
Item
9 - 1
Detailed explanation
MR-JE-_A section 11.1
MR-JE-_A section 11.2
MR-JE-_A section 11.3
MR-JE-_A section 11.4
MR-JE-_A section 11.5
MR-JE-_A section 11.6
MR-JE-_A section 11.7
MR-JE-_A section 11.8
MR-JE-_A section 11.9
MR-JE-_A section 11.10
MR-JE-_A section 11.11