Mitsubishi MR-JE-200A Instruction Manual page 235

6. APPLICATION OF FUNCTIONS
3) Cam axis one cycle length setting (2D84h)
Address
2D84h One cycle length of CAM axis
The cam axis one cycle length can be written in the RAM space in the servo amplifier using the
function code "10h" (Preset Multiple Registers).
The values set with this register are deleted at power-off.
4) Cam stroke length setting (2D85h)
Address
2D85h Stroke movement of CAM
A cam stroke length can be written in the RAM space in the servo amplifier using the function
code "10h" (Preset Multiple Registers).
The values set with this register are deleted at power-off.
5) Request store CAM (2D88h)
Address
2D88h Request store CAM
Cam data can be written in the RAM space in the servo amplifier using the function code "10h"
(Preset Multiple Registers). Always set "0" in this register.
The values set with this register are deleted at power-off.
Name
Name
Name
6 - 22
Data
Read/write
type No. of Registers
4 bytes Write
Data
Read/write
type No. of Registers
4 bytes Write
Data
Read/write
type No. of Registers
1 byte Write
Continuous
No. of points/ read/
continuous
write
2 Impossible
Continuous
No. of points/
read/
continuous
write
2 Impossible
Continuous
No. of points/ read/
continuous
write
1 Impossible