Indirect Addressing Window - Mitsubishi MR-JE-200A Instruction Manual

5. HOW TO USE THE PROGRAM
(4) Pasting text (d)
Click "Paste" to paste the copied text on the clipboard to a specified place in the program edit area.
(5) Ending program data window (e)
Click "OK" to execute the edit check. When no error is found in the program, the edit ends and the
program data window will be closed. If an error is found in the program after the edit check, the error will
be displayed.
(6) Canceling window for program edit (f)
Click "Cancel" to close the window for program edit without saving the program currently being edited.
(7) Displaying error (g)
When the edit check of (5) detects an error in the program, the line No. and content of the error will be
displayed. Click the error content, the cursor will move to the line of the corresponding program.

5.8.3 Indirect addressing window

Set general purpose registers (D1 to D4 and R1 to R4) in this window.
(1) Register edit field (a)
Set general purpose register values of D1 to D4 and R1 to R4.
(2) Register reference field (b)
The last register value read from the servo amplifier is displayed.
(3) ROM writing (c)
Write register values (D1 to D4 and R1 to R4) stored in the servo amplifier to the servo amplifier.
(b)
5 - 67
(a)
(c)