Settings of FP7 MC Unit
5.6 Transfer of Parameters
5.6.1 Writing Parameters to Unit
The set parameter information is downloaded to the memory of FP7 MC Unit. The following
procedure is explained on the condition that CMI has already started.
PROCEDURE
1. Select "File" > "Download to Unit" from the menu bar.
A confirmation message is displayed.
2. Confirm the message, and press the [Yes] button.
When the CPU is in RUN mode, the following message is displayed.
3. Select a unit to which the setting data is downloaded, and press the [Yes]
button.
The FROM confirmation message is displayed.
5-18