4. Select the axes to be used, and press the [OK] button.
The dialog box for the interpolation operation group setting is displayed. When
you do not set the interpolation operation, go to step 6.
5. Drag the line to be allocated for interpolation to the interpolation group field.
The following picture shows the allocations of "axes 1 and 2" to "group 1" and
"axes 3 and 4" to "group 2" of interpolation groups. When removing the axes from
the interpolation groups, right-click on the target axis in the "Interpolation group"
field and execute "Clear".
6. Press the [OK] button.
4.3 Setting of Used Axes
4-7