Confirmation Of Setting Contents; Check On Parameter Data; Comparison Of Parameter Information - Panasonic AFP7MC16EC User Manual

Settings of FP7 MC Unit

5.5 Confirmation of Setting Contents

5.5.1 Check on Parameter Data

The following procedure is explained on the condition that CMI has already started.
PROCEDURE
1. Select "Debug" > "Check parameters and data values" from the menu bar.
A message box is displayed to show the check result.
(In normal state)
2. Press the [OK] button.
The screen returns to the editing screen of CMI.

5.5.2 Comparison of Parameter Information

The following items can be verified using CMI.
• Verifying the data being edited with saved cmi files
• Verifying the data being edited with the unit memory (RAM) data in the unit
The following procedure is explained on the condition that CMI has already started.
PROCEDURE
1. Select "Debug" > "Compare" > "File" or "Unit" from the menu bar.
When "File" is selected, the "Select verification file" dialog box is displayed.
When "Unit" is selected, the "Verify - Unit selection" dialog box is displayed.
2. Select a target (file or unit) to be verified, and press the [OK] button.
The verification result is displayed.
5-16
(In abnormal state)