Table of Contents
Advertisement
Settings of FP7 MC Unit
5.3 Positioning Table Setting
5.3.1 Construction of Positioning Tables
Positioning tables are assigned using CMI. The following procedure is explained on the
condition that CMI has already started.
Positioning table setting screen of CMI
• Sheets are divided for each axis, and 1000 tables ranging no. 1 to no. 1000 can be set.
• By double-cliking an arbitrary axis of the project tree in CMI, the positioning data table opens.
• When setting the interpolcation control, the cell for "Interpolation operation" as a selection
item is added between Operation pattern and Control method. Also, the input cells for
Movement amount and Auxiliary point are added according to the number of axes.
In the above example, the real axes 1 to 16 and virtual axes 1 to 8 are displayed.
REFERENCE
•
For details of each control, refer to "8 Automatic Operation (Position
Control)".
5-10
Advertisement
Table of Contents
