Types Of Home Return - Panasonic AFP7MC16EC User Manual

Motion control unit
Hide thumbs Also See for AFP7MC16EC:
Table of Contents

Advertisement

Manual Operation (Home Return)

11.1 Types of Home Return

 DOG method 1 (Based on front end + Z phase)
• The leading edge of the first home position (Z phase) is set as a home position after the
detection of the leading edge of a near home input (HOME).
• In the case of the DOG method 1, the operation stops once after the detection of the leading
edge of a near home input (HOME) as the home return positioning control mode
(Method33/34) of Servo Amplifier A5B is used. The home position is searched at a home
return creep speed again, and the operation stops when the leading edge of the first home
position (Z phase) is detected.
(Note): The home return positioning control mode (Method33/34) of Servo Amplifier A5B is a mode to detect an index
pulse as a home position. The home return direction of Method33 is the - direction, and that of Method 34 is the
+ direction.
The starting point is
between the near home
input and limit (+) input.
(including the starting point
on the limit (+) input)
The starting point is on the
near home input.
The starting point is
between the near home
input and limit (-) input.
The starting point is on the
limit (-) input.
11-2
Limit (-) input
Z phase
Target speed
Limit stop
deceleration time
Near home input
Home return creep speed
Home return creep speed
Target speed
Home return creep speed
Target speed
Target speed
Temporary stop
Home return direction
Limit (+) input
Target speed
Home return
deceleration time
Home return
deceleration time
Home return
deceleration time
Home return
deceleration time

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fp7Afp7mc32ecAfp7mc64ec

Table of Contents