Manual Operation (JOG Operation)
10.3 Setting and Operation of JOG Inching Operation
In this example, a forward or reverse operation is performed in the JOG operation by the
inching operation.
Reverse JOG
Table
Ball screw
(-) side
Settings
Item
Acceleration/deceleration pattern
Acceleration time (ms)
Deceleration time (ms)
Target speed
JOG inching movement amount
Operation diagram
f [pps]
10000
JOG inching
operation request
JOG operation
Forward/Reverse request
BUSY flag
Operation done flag
KEY POINTS
The inching operation starts at the leading edge of the JOG forward/reverse
•
request. Also, when the request signal is short, it operates until the pulse
set for "inching movement amount" is output.
10-6
Forward JOG
(+) side
Setting example
0: Linear acceleration/deceleration
100 ms
100 ms
10000 pps
10000 pulses
100
100
100
100
t [ms]