Installation and Wiring
3.2 Connection of Network
3.2.1 Wiring
FP7
MC
100m max.
• The cable connected to FP7 MC Unit is connected to the connector X2A of Servo Amplififer
A5B.
• The distance between each node should be within 100m.
3.2.2 Precautions on Wiring
• Always use shielded twisted pair (STP) cables that are compatible with category 5e or higher.
• Turn off the power supply of the system before wiring cables.
• To prevent the cable from coming off, securely connect the connector of the cable to the
network connector (RJ45 connector) of the unit.
• Hubs for EtherCAT and Ethernet cannot be used.
3-4
AMP
X2A
X2B
100m max.
AMP
X2A
X2B
100m max.
AMP
X2A
To the next page