Stored Data Of The Output Contact (Wy); Analog Output Values; Input Range Setting Area - Panasonic AFPXHEAD4 User Manual

3.3 Stored Data of the Output Contact (WY)

3.3 Stored Data of the Output Contact (WY)

3.3.1 Analog Output Values

When a digital value is written, the value is converted to a corresponding analog output and is
output.
■
Applicable model
Model
AFPXHEDA4
AFPXHEA21
■
Digital conversion values
Digital conversion values for each output range are as follows.
Output range
For -10 to +10 V, -5 to +5 V
For 0 to +10 V, 0 to +5 V
For +1 to +5 V
For 0 to +20 mA
For +4 to +20 mA
■
I/O allocation
Channel
CH0
CH1
CH2
CH3
When the RUN mode is changed to the PROG. mode, the analog output will be as follows.
● When +1 to +5 V is selected: 1 V
● When +4 to +20 mA is selected: 4 mA
● Other than the above: 0 V or 0 mA

3.3.2 Input Range Setting Area

When an input range setting is entered, the analog input range is set.
3-8
Expansion location
1st unit 2nd unit 3rd unit
WY30 WY40 WY50
WY31 WY41 WY51
WY32 WY42 WY52
WY33 WY43 WY53
Channel
CH0 to CH3
CH0
Digital conversion values
K-32000 to K+32000
K0 to K+32000
K0 to K+25600
K0 to K+32000
K0 to K+25600
4th unit 5th unit 6th unit
WY60 WY70 WY80
WY61 WY71 WY81
WY62 WY72 WY82
WY63 WY73 WY83
7th unit 8th unit
WY90 WY100
WY91 WY101
WY92 WY102
WY93 WY103
WUME-FPXHAIO-01