Snmp Trap Link-Status All - Hirschmann RS20 Reference Manual

4.5.24 snmp trap link-status all

This command enables link status traps for all interfaces.
Note: This command is valid only when the Link Up/Down Flag is enabled
(see "snmp-server enable traps linkmode" ).
Format
snmp trap link-status all
Mode
Global Config
no snmp trap link-status all
U
This command disables link status traps for all interfaces.
Note: This command is valid only when the Link Up/Down Flag is enabled
(see "snmp-server enable traps linkmode").
Format
no snmp trap link-status all
Mode
Global Config
CLI L2B
Release 4.0 11/07
4.5 Device Configuration Commands
121