Show Temperature; Snmp-Server - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.1.15 show temperature

This command displays the lower and upper temperature limit for sending a
trap.
Format
show temperature
Mode
Privileged EXEC and User EXEC

4.1.16 snmp-server

This command sets the name and the physical location of the switch, and the
organization responsible for the network.The range for name, location and
contact is from 1 to 31 alphanumeric characters.
Default
None
Format
snmp-server {sysname
tact
<con>
Mode
Global Config
CLI L2B
Release 4.0 11/07
4.1 System Information and Statistics Com-
<name>
}
| location
<loc>
| con
55