Show Lldp Config Port Tlv - Hirschmann RS20 Reference Manual

4.8.11 show lldp config port tlv

This command shows all LLDP TLV configuration settings (if the given infor-
mation is included in the sent LLDP frames or not) concerning one or all
ports.
Format
show lldp config port <{slot/port|all}> tlv
Mode
Privileged EXEC and User EXEC
inlinepower
Enable or disable the sending of the port's Power over Ethernet capa-
bilities (PoE, IEEE 802.3af), available for MACH 4000.
link-aggregation
Display the port's LLDP TLV inclusion of Link Aggregation.
mac-phy-config-state
Display the port's LLDP TLV inclusion of MAC Phy. Cfg. State.
max-frame-size
Display the port's LLDP TLV inclusion of Max. Frame Size.
mgmt-addr
Display the port's LLDP TLV inclusion of Management Address.
port-desc
Display the port's LLDP TLV inclusion of Port Description.
protocol
Display the port's LLDP TLV inclusion of Protocol.
sys-cap
Display the port's LLDP TLV inclusion of System Capabilities.
sys-desc
Display the port's LLDP TLV inclusion of System Description.
sys-name
Display the port's LLDP TLV inclusion of System Name.
150
4.8 LLDP - Link Layer Discovery Protocol
CLI L2B
Release 4.0 11/07